Gold Pre-Oxidisation Tank Before Cyanide Leaching Extraction

Gold Pre-oxidisation Tank prior to Cyanide Leaching Extraction

Functioning Basic principle
The device is largely composed of a circular tank and an agitator. The generate technique consisting of motor, reducer and help foundation drives the agitator to rotate. The agitator has the lower and upper impellers, each and every with four blades. The blade’s rotation produces sturdy thrust which forces the pulp to stream from up to down at the heart of the tank. The pulp diffuses alongside the radial route at the bottom of the tank then flows upward alongside the round wall of the tank, thus a shut cycle is formed. If the device is utilized as a leaching tank, the leaching agent answer and air are crammed into the tank, and the leaching agent and air are evenly distributed in the tank to leach gold. If the device is employed as the adsorption tank, activated carbon or other components with powerful adsorption ability is put into the tank to adsorb gold dissolved in the answer.
Normally at minimum 6 tanks operate collectively continuously to complete the complete circuit to recuperate gold as considerably as attainable.

Features
Pulp relocating smoothly and uniform mixing which brings about significantly less electricity consumption.
Air is inflated into the heart of the tank and agitated by the blades of the agitator to evenly disperse in the tank which maximizes the utilization of oxygen.
The distinctive agitator composition makes the strong content material of the pulp uniform in all positions of the tank to keep away from the particles settling.
CZPTy blade of the agitator is lined with use-resistant rubber. Reduced rotating speed of the agitator cause lengthy support daily life and effectively protect activated carbon, so that the cheapest dress in of activated carbon avoids gold reduction brought on by that the gold loaded carbon is damaged and enters tailings.
The Multi-position air inflation program increases the utilization price of oxygen and can make oxygen, reagents & minerals to speak to every other fully which improves the leaching effectiveness and shortens the leaching residence time.
The air inflation method and special higher-stress h2o devices share a pipeline method. If the tank loaded with slurry is stopped for a extended time, the particles will settle by natural means and pile together on the base of the tank. The lower impeller is blocked fully since the height of the particles pile will exceed the top of the reduce impeller. The particles around the impeller can be unfastened by large-stress h2o which tends to make it effortless to start off the agitator once more.

Software Scope
This agitation tank series is employed for the agitation, leaching and carbon adsorption in the gold cyanide plant with the particle dimensions of -200 meshes a lot more than 90% and the focus of considerably less than 45%. It can also be utilized for mixing, agitation and leaching procedure in industries these kinds of as metallurgy, chemical sector and light business beneath corresponding situations.

CZPT Parameters
Little Dimension

Product Tank Spec. Diameter × Height
(mm).
Successful Quantity
(m3)
Impeller Rotation Speed
(r.p.m)
Impeller Diameter
(mm)
Energy
(kW)
LT2.0×2.five 2000×2500 six 52 909 two.2
LT2.5×3.15 2500×3150 13.fourteen 935
LT3.0×3.15 3000×3150 18.ninety three 43 1130 four
LT3.0×3.5 3000×3500 21
LT3.15×3.fifty five 3150×3550 24 1260
LT3.5×3.five 3500×3500 30 fifty two 1310 5.5
LT3.55×4. 3550×4000 33.6 forty three

Medium Size

Product Tank Spec. Diameter × Height
(mm).
Powerful Quantity
(mthree)
Impeller Rotation Pace
(r.p.m)
Impeller Diameter
(mm)
Electricity
(kW)
LT4.0×4.five 4000×4500 forty eight 35 1750 7.5
LT4.5×5. 4500×5000 71.57 1750
LT5.0×5.6 5000×5600 98 31 2046 11
LT5.5×6. 5500×6000 112 2100
LT6.5×7. 6500×7000 195 21 2400 22
LT7.0×7.five 7000×7500 245.four 21 2400 22
LT7.5×8. 7500×8000 268.6 23 2900 22
LT8.0×8.5 8000×8500 342 18.five 3300 thirty

Huge Dimension

Model Tank Spec. Diameter × Peak
(mm).
Successful Quantity
(m3)
Impeller Rotation Speed
(r.p.m)
Impeller Diameter
(mm)
Electrical power
(kW)
LT8.5×9. 8500×9000 435 eighteen.five 3436 thirty
LT9.0×9.5 9000×9500 515 14.eight 3900 37
LT9.5×10 9500×10000 638 14.eight 4000 45
LT10×10.5 10000×10500 705 fourteen.8 4000 forty five
LT10.5×11 10500×11000 815 thirteen.2 4400 55
LT11×12 11000×12000 983 thirteen.two 4400 fifty five
LT12×13 12000×13000 1320 12 4800 seventy five

1. What is the major company scope of your business?
HZE is a company with R&D middle, design institute, production factories, set up and commissioning teams. Our clients are in the mining and mineral processing fields. Our main companies incorporate mineral processing EPC (engineering, procurement and development), venture consultation, engineering layout, mineral processing products producing, on-website set up, commissioning, staff training, customer undertaking operation administration, spare elements supply and technical support. CZPTers are free to select any 1 or any combination of our providers.

two. What are the excellent advantages of your company?

The a single-stop provider of mineral processing engineering task and gear is our main competitiveness.
The most important function that HZE distinguishes alone from other engineering firms, style companies or consulting companies is that we are also an tools producer with a creation plant of fifty,000 square meters, and we have comprehensive production rout and the associated equipment.
HZE distinguishes by itself from other gear companies by owning its very own R&D centre and engineering design institute.
HZE distinguishes alone from numerous mining machinery enterprises by possessing an expert team with associates which includes not only senior engineers of the company, but also best Chinese technological authorities, college professors and researchers.

three. What are the traits of your company’s 3D layout?

HZE not only makes use of 3D computer software to style gear, but also employs 3D software program to design approach circulation, pipeline, steel composition, auxiliary facilities, etc. of the whole mineral processing venture. We even use 3D layout for gear packaging, container packing and gear instructions handbook. This greatly enhances the quality of products and engineering, shortens the construction interval, facilitates technological discussion and analysis, facilitates project administration, enhances design safety and minimizes project expense.

4.  What are the provider functions of your organization?

  1. CZPTers who regardless of whether acquire our gear, or entrust us with EPC, or demand us to offer a specific services, cooperate intently with us to carry out specific functions and supervise our implementation through the approach.
  2. HZE will attempt to recognize the simple situation and needs of customers as thorough as feasible ahead of the sale, formulate a preliminary plan according to the particular situation of buyers, and get unanimous opinions following communications and conversations with customers to establish the prepare.
  3. We established up client files for every client who signed the deal with us and add them to the Cloud where customers can also get an account and password. CZPTers can have all the documents, video clips and images, engineering, companies, execution, procedure, administration and manage, upkeep and so on related to the company.
  4. Whether or not it is in the approach of standard contracting, gear production or providing some sort of service, we welcome buyers to know about our implementation on the spot or via the network, and put CZPT requirements and viewpoints.
  5. We support end users who have utilised our products to formulate procedure specifications and make tips on servicing plans and spare components inventories. In addition to program on-web site set up, commissioning and instruction, in the course of the production period right after we handing in excess of gear to consumers for use, we frequently comprehend the tools using circumstances through the community and offer direction and coaching to consumer administration and operators.
  6. For the clients who have just start off the mining organization, we offer the prospect of training and apply in China’s mines for the clients’ employees, until finally they are skilled in procedure and servicing.

Gold Pre-Oxidisation Tank Before Cyanide Leaching Extraction